⚠️ Disclaimer: This software was "vibe coded" with Claude Code. Use at your own risk. No warranty or guarantee is provided.

A Go CLI tool to monitor Homebridge accessory status changes in real-time. Track when lights turn on/off, outlets switch states, and other HomeKit accessory changes across your smart home.

• Zero-configuration setup with automatic Homebridge discovery via mDNS
• Real-time monitoring of all Homebridge accessories
• Two monitoring modes: HAP protocol (default) or HTTP API
• Optional integration with AWTRIX3 firmware LED matrix displays (tested on an Ulanzi TC001)
• Automatic discovery of child bridges via mDNS
• Human-readable output with timestamps
• Debug mode for troubleshooting
• Configurable polling intervals (default: 3s)
• Environment variable configuration

Real-time monitoring of Homebridge accessories with automatic discovery and AWTRIX3 display integration

No manual configuration provided, attempting auto-discovery...
Auto-discovered Homebridge at: 192.168.0.12:8581
Auto-discovered AWTRIX3 at: 192.168.0.16:80
Starting Homebridge Captain's Log (checks: infinite, interval: 3s, exclude:volts,consumption,amperes,outlet)

Discovered bridges:
  - homebridge-sec at homebridge.local:52701
  - TplinkSmarthome at homebridge.local:52230
  - Harmony at homebridge.local:31156
  - Hydrawise at homebridge.local:32781
  - PentairIntelliCenter at homebridge.local:30722
  - Airthings Device at homebridge.local:36019
  - Pihole at homebridge.local:57533

[20:03:38] TplinkSmarthome 7829 Casa Lights: Total Consumption 4.073 -> 4.074 (excluded)
[20:03:56] homebridge-sec 2A47 Master Motion Detector: DETECTED
[20:03:59] TplinkSmarthome 7829 Bedroom Light: ON
[20:03:59] TplinkSmarthome 7829 Bedroom Light: Volts 121.9 -> 122 (excluded)
[20:04:11] homebridge-sec 2A47 Living Detector: DETECTED
[20:04:17] TplinkSmarthome 7829 Bedroom Light: Consumption 0 -> 11.5 (excluded)
[20:04:26] TplinkSmarthome 7829 Bedroom Light: Outlet In Use 0 -> 1 (excluded)
[20:04:29] homebridge-sec 2A47 Living Detector: CLEARED
[20:04:29] homebridge-sec 2A47 Garden Door: OPENED
[20:04:32] homebridge-sec 2A47 Garden Door: CLOSED
[20:04:38] TplinkSmarthome 7829 Bedroom Light: Total Consumption 0.194 -> 0.195 (excluded)
[20:04:52] PentairIntelliCenter 37CX Air Sensor: temperature 73.9°F → 73.0°F

go install github.com/astrostl/homebridge-captains-log@latest

The binary will be installed as homebridge-captains-log in your $GOPATH/bin directory.

git clone https://github.com/astrostl/homebridge-captains-log
cd homebridge-captains-log
make build

This creates the hb-clog binary in the current directory.

Zero Configuration (Recommended)

The tool now works out of the box with automatic discovery:

# Run immediately - no configuration needed!
./hb-clog

Manual Configuration (Optional)

For specific setups or when auto-discovery fails:

1. Copy the environment example:

   cp .env.example .env

2. Edit .env with your settings:

   # Homebridge configuration
   CLOG_HB_HOST=192.168.1.100  # Your Homebridge IP
   CLOG_HB_PORT=8581           # Homebridge UI port
   CLOG_HB_TOKEN=your_token    # Get from /api/auth/noauth
   
   # AWTRIX3 LED matrix display configuration (optional - for display output)
   CLOG_AT3_HOST=192.168.1.200 # Your AWTRIX3 device IP
   CLOG_AT3_PORT=80            # AWTRIX3 port (usually 80)
   CLOG_AT3_EXCLUDE=volts,batterylevel  # Exclude specific characteristics from notifications

3. Get your authentication token:

   Option A: With Authentication Disabled (Easiest)

   curl -X POST http://your-homebridge-ip:8581/api/auth/noauth

   Enable this in Homebridge UI under Config → Homebridge Settings → "Disable Authentication".

   Option B: With Authentication Enabled If you prefer to keep authentication enabled, manually obtain a token from the Homebridge UI and set it in your .env file. The tool will work with any valid authentication token.

# Monitor all child bridges (HAP mode - recommended)
./hb-clog

# Monitor main bridge only 
./hb-clog --main

# Enable debug output
./hb-clog -d

# Custom polling interval
./hb-clog -i 10s

# Discovery-only mode (discover services and exit)
./hb-clog -c 0

# Run for specific number of checks then exit
./hb-clog -c 5

# Exclude specific characteristics from AWTRIX3 notifications
./hb-clog -e volts,batterylevel

# Combine options
./hb-clog -d -i 5s -c 10 -e volts

• Monitors all child bridges directly via HomeKit Accessory Protocol
• Automatically discovers child bridges using mDNS
• More comprehensive coverage of accessories
• Works with complex Homebridge setups

• Monitors main bridge only via Homebridge REST API
• Simpler setup but limited to main bridge accessories
• Use --main flag to enable

make all          # Full build pipeline (quality + test + build)
make build        # Build only
make test         # Run tests
make quality      # Comprehensive quality checks

# Single check with debug output
./hb-clog -d -c 1

# Short test run
./hb-clog -d -c 3 -i 5s

Use dns-sd to debug service discovery:

# Browse for HAP services
timeout 5s dns-sd -B _hap._tcp

# Look up specific service details
timeout 3s dns-sd -L "ServiceName" _hap._tcp local.

• No accessories found: Check Homebridge is running and accessible
• Authentication errors: Verify token with /api/auth/noauth endpoint
• mDNS failures: Ensure mDNS/Bonjour is working on your network
• Connection timeouts: Check firewall settings and network connectivity

• Bridge filtering - Include/exclude specific child bridges from monitoring (e.g., --bridge-include, --bridge-exclude)
• Accessory filtering - Monitor only specific accessories or exclude certain ones (e.g., --accessory-include, --accessory-exclude)
• Status filtering - Filter by specific characteristic changes (e.g., --status-include On,MotionDetected, --status-exclude BatteryLevel)
• Non-Homebridge HomeKit device polling (requires becoming a full HomeKit controller with Ed25519 keypairs, SRP pairing, and ChaCha20-Poly1305 encryption)

MIT License - see LICENSE file for details.

1. Fork the repository
2. Create a feature branch
3. Run make quality to ensure code quality
4. Submit a pull request